Tuesday, January 31, 2012

Business Square in Kathmandu

One of our architectural venture in Kathmandu. This upcoming building project should redefine the way one contemplates about Kathmandu in terms of global architectural perspectives.

Shall add
more pictures and link soon..!




Society of  Nepalese Architects (SONA) Activities


Wednesday, January 25, 2012

DIY Passive Solar Water Heater Innovation 100sft performance

We are putting our concluding video of Passive solar till we decide to do yet another DIY solution
This DIY passive solar water heater innovation illustration with a roll of black pipe is meant for a novice to have a complete picture of the simplicity of the construction of this amazing simple energy solution for hot water for any kind of use.
The 100 sft DIY is compatible with 3 panel 54 sft flat plate collector which people normally use for their daily water requirement. The performance of this DIY has been put to test by us and it has a thermal gain of nearly 40 degree Celsius very much comparable with flat plate solar. Which should get even bigger as the minimum ambient air temperature goes above 2 centigrade in Kathmandu. In fact we found it to be working amazingly well beyond our expectation.
We are sure this DIY Passive Solar Innovation change the way people think about energy. Foe people in the colder climate Hot water would be no more a poor man's luxury.



Monday, January 23, 2012

DIY innovations 100sft panel and our solar aerana

DIY innovation 100sft Panel
Feeling the heat at the top
Temperature recorded for 100sft DIY  at 1pm
check the gain at 100F, shall shot to may be 112 today
DIY smaller innovation 28 sft panel
DIY and flat plates
My GREEN and me with the mobile









Sunday, January 22, 2012

DIY 100sft Passive Solar Water Heater Innovation Pictorial Illustration

This DIY passive solar water heater innovation illustration with a roll of black pipe is meant for a novice to have a complete picture of the simplicity of the construction of this amazing simple energy solution for hot water for any kind of use.

The 100 sft DIY is compatible with 3 panel 54 sft flat plate collector which people normally use for their daily water requirement. The performance of this DIY has tested by us and it has thermal gain of nearly 40 degree Celsius. Which should get even bigger as the minimum ambient air temperature goes above 2 centigrade in Kathmandu.
We are sure this DIY Passive Solar Innovation change the way people think about energy. Foe people in the colder climate Hot water would be no more a poor man's luxury.
We also believe in the fact that the "Money we save is the money we earn". So save money and promote simple DIY's for better tomorrow.



DIY Passive Solar Water Heater- Vol. 2

WIth plastic barrel ... in case if You want to build one out of it our entry to GE ecomagination Powering Your Home http://challenge.ecomagination.com/home/Passive-Solar-heater-Innovation-DIY

Easiest passive solar heater, This DIY Solar Water Heater can be done by anyone at home, Cheapest Solar and Easiest Solar ,as easy as joining two ends of pipe, and presto!
Our basic idea of putting this innovative Solar Water Heater on YouTube is to make people understand the simplest way to store the heat energy of the sun for everyday use. Everyone knows if one puts anything under the sun, it starts getting hot slowly irrespective of the ambient temperature. It can be freezing cold or extremely hot, the free energy of the sun goes wasted unless it is tapped and stored.

There are many different ways to tap the solar energy for heating mainly for domestic use, the very first step to harness the free energy. The normal solar panel a regular house hold item of the urban areas are far too complicated if one starts building on his own, He shall end up going to the vendor as it requires a mini workshop setup, with welding machines and other piping accessories tools. The vacuum tube solar is an amazing product though, but it requires even bigger investment for simple assembly itself at home.

These high end technologies not yet very complicated by the present advancement of science are like mirage if one goes to the rural setup of remote areas in so many parts across the globe.

The distinction of this innovative Solar Water Heater and the rest of the solar water heater lie in the fact that it requires a very little technical skill and can be assembled by almost everyone even in the remotest part of the world.

The polythelene black HDPE/PVC/UPVC pipe being lighter can be transported very easily, and the Mild steel tank can also be replaced by HDPE water tank a light weight item too. The absorber base can be made with cement mortar also if required.

Similarly with simplicity and economy for thermal gain of more than 35 degree Celsius it can also create a big avenue for power generations through closed cycle engines.

This economic and light weight HDPE/PVC/UPVC solar can be installed in and around the trekking routes of Annapurna and Everest trek trail, and thousands of tourist can enjoy the hot solar shower easily without destroying the Firewood of that region, which in turn helps to retain the green, a very suitable alternative to enhance the beauty of the nature.

This Video is further elaboration on the entry to GE Challenge ecomagination 2010 submission video, worldwide competition for possible collaboration and funding from GE for a huge sum for investment around the globe.




DIY Passive Solar Water Heater

Easiest passive solar heater, This DIY Solar Water Heater can be done by anyone at home, Cheapest Solar and Easiest Solar ,as easy as joining two ends of pipe, and presto!
This is an entry GE Challenge ecomagination submission video, worldwide competition for possible collaboration and funding from GE for a huge sum, it this idea wins.
It is a bare science fact, if one puts anything under the sun it gets hot, but this video illustrates to store the heat energy for future use also.
Similarly with simplicity and economy for thermal gain of more than 25 degree Celsius it can also create a big avenue for power generations through closed cycle engines.
This happens only by joining two ends of pipes to a storage point as illustrated in the video. Insulated storage point tank is optional, but it definitely enhances the utility factor.
We have also developed designs for rural areas, the collector can be made with cement mortar and brick too, but the desired inclination as in illustration has to be there. Top cover is heavy gauge plastic sheet.
This economic and light weight PVC/UPVC/HDPE solar can be installed in and around the trekking routes of Annapurna and Everest trek trail, and thousands of tourist can enjoy the hot solar shower easily without destroying the Firewood of that region, which in turn helps to retain the green, a very suitable alternative to enhance the beauty of the nature.

contact us at :
easysolarproject@gmail.com

if u like this project support it and vote for it and comment on it at
http://challenge.ecomagination.com/ct/ct_a_view_idea.bix?c=ideas&idea_id=...




About Me

My photo

Professional Architect,ardent supporter of innovative and indigenous low cost green technology for the benefit of the common man. 

Presently working with many different type of Apartments,Commercial buildings, Housing and corporate building projects, including one on floriculture producing roses which purely relies on the sun and the soil but in an enclosed environment. 
We have applied for the pattent of our designs with the local authority,large scale production of this idea needs our consent.We shall appreciate all the DIY projects for philanthropic use and funding.

Followers